Kurt J. Lesker Company

Specifications

Mass Range	1.00 - 100 amu
Sensitivity	3.000 x 10^-4 A/Torr
Pressure	Minimum Detectable Partial, Electron Multipler 2.000 x 10^-14 mbar 1.500 x 10^-14 Torr Minimum Detectable Partial, Faraday Cup 3.500 x 10^-12 mbar 2.600 x 10^-12 Torr Operating 5.000 x 10^-4 mbar 5.000 x 10^-4 Torr
Temperature	Bakeout (without Electronics) 300 ºC 572 ºF Maximum Operating, Electron Multiplier 150 ºC 302 ºF Maximum Operating, Faraday Cup 200 ºC 392 ºF
Sensor Mounting Flange	DN35CF-DN40CF (2.75 in / 69.85 mm OD)
Filament Protection	Built-in pressure plate to automatically turn off emission upon reaching pressure threshold
Resolution - Peak Width (amu) at 10% of peak height	0.9
Zero Blast Interference at Mass 2	<100
Standard Communication	Ethernet connection; IP address with static or automatic assignment
Software	Built-in web interface for monitoring, control, and data acquisition; no downloadable software required
Additional Command Interface	Demo LavVIEW drivers and full access to API for end user built command protocol
Electrical Connector for I/O & Relays	Standard 15 pin sub D Extended 62 pin sub D
Power Input	20-30 VDC 24 VDC typical
Power Connection	Latching, 4 pin DIN connector, internally isolated from system ground
Sensor Length (Vacuum Side) in (mm)	5.63 ( 143 )
Electronics Dimensions (L x W X H) in (mm)	6.69 x 4.53 x 4.79 (170 x 115 x 121 )
Weight lbs (kg)	6.00 ( 2.72 )
Source Type	Open Ion Source
Detector Type	Faraday Cup
Filament Options	Tungsten

Dimensional Drawings

Product	Description	Suggested Part Number	Components Needed
Isolation Valve (Suggested)	An isolation valve allows the KJLC Element RGA to be isolated while not in use to reduce contamination and/or allows for the KJLC Element RGA to be removed from the chamber without having to vent to atmosphere. A 2.75" CF isolation valve is suggested.	Manual Valves: SA0150MCCF Pneumatic Valves: SA0150PCCF, SE024D4XX	KJLC Angle Valve, Mounting hardware, and solenoid (only for pneumatic valve).
Heater Jacket Kits (Suggested)	A heater jacket kit provides a method to uniformly bake-out the KJLC Element RGA to reduce or remove contamination. The KJLC Element RGA can be baked out to 300°C while the electronics removed, 200°C while the Faraday Cup only is in operation, or 150°C while the Electron Multiplier is in operation. You still need to keep the electronics at or below 50°C however.	961-029-G1 (US 120V) 961-029-G2 (DE 240V) 961-029-G3 (UK 240V)	All heater jackets kits include Heater Jacket, Power Cord, Mounting Kits, and Cable set.
Extension Tube (Included)	An extension tube allows the RGA sensor to be mounted outside of the chamber to reduce line of sight and possible contamination. An 8" extension tube is suggested.	Custom Nipple Builder FN-C3113080	Extension tube included with KJLC Element RGA.
Communication Cable (Included)	Ethernet cable needed to connect the RGA to a laptop for communication.	—	10ft. cable included with KJLC Element RGA. 7m and 15 m cables available in accessories table.
Connecting Hardware (Included)	Hardware used to connect the KJLC Element RGA to the chamber.	—	DN40CF gasket, nuts, and bolts are included with the KJLC Element RGA.
Power Supply (Required)	Standard power supply to power the RGA.	ELE163600 (US Power Supply) ELE163601 (EU Power Supply) ELE163602 (UK Power Supply)	Region specific power supply kit includes power supply and appropriate cable.

Description	Part Number	Price	In Stock	Add Item	Combine How to Combine - Click the checkboxes of the parts you would like to purchase and then click the button below to add all parts selected into your Cart.
Description	Part Number	Price	In Stock	Add Item	Combine How to Combine - Click the checkboxes of the parts you would like to purchase and then click the button below to add all parts selected into your Cart.
KJLC ELEMENT RGA REPLACEMENT PART, ION SOURCE KIT, TUNGSTEN	ELE163211	$1,645.00			Combine
KJLC ELEMENT RGA REPLACEMENT PART, FILAMENT KIT, DUAL TUNGSTEN	ELE163311	$850.00			Combine
KJLC ELEMENT RGA SPARE PARTS, EM/FC EXTENSION TUBE KIT, INCLUDES NUTS AND BOLTS	ELE163501	$482.00			Combine
KJLC ELEMENT RGA SPARE PARTS, O-RING AND NUT KIT FOR CONNECTION BETWEEN ELECTRONICS AND SENSOR	ELE163545	$57.00			Combine
POWER SUPPLY KIT, RGA, 80-250 VAC, 4ft (1.2m), US PLUG	ELE163600	$340.00			Combine
KJLC ELEMENT RGA POWER SUPPLY, 80-250 VAC, 4ft (1.2m), EU PLUG	ELE163601	$340.00			Combine
KJLC ELEMENT RGA POWER SUPPLY, 80-250 VAC, 4ft (1.2m), UK PLUG	ELE163602	$340.00			Combine
KJLC ELEMENT RGA POWER SUPPLY, 80-250 VAC, 4ft (1.2m), IL PLUG	ELE163603	$340.00			Combine
KJLC ELEMENT RGA CABLE, ETHERNET COMMUNICATIONS, 7m	ELE163604	$34.50			Combine
KJLC ELEMENT RGA CABLE, ETHERNET COMMUNICATIONS, 15m	ELE163605	$51.00			Combine

ELE1FB100 KJLC ELEMENT RGA, 100 AMU, FARADAY CUP, TUNGSTEN FILAMENTS, EXTENDED I/O, DIGITAL SOFTWARE VIA WEB INTERFACE / IP BASED, POWER SUPPLY SOLD SEPARATELY

Specifications

Firmware Updates

Accessories for the KJLC Element

Accessories Table

Related Products