Klübertemp GR M 30N Vacuum Grease –
Temp Range (-60 to +200 (°C))
Long-term greases for a wide temperature range
Description
Klübertemp GR M greases are white, odourless, long-term greases based on perfluorinated polyether (PFPE) oils and polytetrafluoroethylene (PTFE) thickener. The extremely high viscosity index, i.e. the very flat viscosity curve of the base oils, allows excellent sliding friction properties across a wide service temperature range. Klübertemp GR M greases show a neutral behavior towards most plastics and elastomers and can therefore be used for a variety of component materials.
Benefits
Long component life:
- over a wide service temperature range
- in contact with aggressive media
- where sensitive plastic materials are used
- under vacuum
Application
Klübertemp GR M greases are preferably used for the lubrication of small electric motors, controls and switches, plastic gears and seals where they show low breakaway torques, exceptionally low friction values as well as a reduced tendency to stick-slip.This leads, for example, to lower frictional heating of elastomers subject to dynamic loads and hence longer component life.
General behavior towards elastomers and plastics
Lubricants based on perfluorinated polyether oils and polytetrafluoroethylene are generally regarded as neutral towards most elastomers and plastics (possible exception: highly fluorinated rubber). Nevertheless, compatibility with the materials should be tested, especially prior to series application.
Other application examples:
- Linear guides
- Small gears
- Clean room equipment
Application Notes
For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Klüberalfa XZ 3-1. Then blow the surfaces with clean, dry air or hot air to remove solvent residues. For initial lubrication, the friction points must be clean and bright, i.e. free from oil, grease, perspiration and contamination. Klübertemp GR M greases may be applied directly or by means of brush, spatula or lubricant dispenser. The technical sales departments at Klüber Lubrication may be contacted at any time for advice to ensure optimum service life results.
Specifications
| Product data | Klübertemp GR M 30N |
| Article number | 090177 |
| Chemical composition, type of oil | PFPE |
| Chemical composition, solid lubricant | PTFE |
| Lower service temperature | -60°C / -76°F |
| Upper service temperature | 200°C / 392°F |
| Color space | white |
| Texture | homogeneous |
| Vapor Pressure (Torr) | 20°C (Torr): 1.4x10-8 |
| Density at 20°C | approx. 1.9 g/cm3 |
| NLGI grade, DIN 51818 | 2 |
| Worked penetration, DIN ISO 2137, 25°C, lower limit value | 265 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25°C, upper limit value | 295 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40°C | approx. 160 mm2/s |
| Oil separation, based on ASTM D 6184 [FTMS 791 C 321], after 30 h/200 °C | <= 11 % by weight |
| Evaporation loss, ASTM D 2595 22h/204°C | <= 2 % by weight |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 60 months |
Shelf Life
It is strongly recommended using all fluids and greases at the time of receipt, however when storage is necessary, rotate older stock into use first and observe the recommended parameters listed below.
Klüber Grease
Shelf Life of Klüber Grease is a minimum of 5 years; in this case although there won't be problems in terms of chemical stability there can be oil separation over time, which is normal.
Ordering Table
All dimensions listed below, unless otherwise stated, are in grams.
| Description | Grade | Size | Safety Data Sheet | Part Number | Price | In Stock | Add To Cart | |
|---|---|---|---|---|---|---|---|---|
| Description | Grade | Size | Safety Data Sheet | Part Number | Price | In Stock | Add To Cart | |
|
GREASE, |
Klübertemp GR M 30N PFPE Vacuum Grease | 100 g Tube |  |
KLGRM30NF | $203.00 |
|