Klübertemp GR RT 15N Vacuum Grease –
Temp Range (-20 to +250 (°C))
Long-term lubricating greases for high-temperature applications
Description
Klübertemp GR RT greases are white, homogeneous long-term greases based on perfluorinated polyether oils (PFPE) and polytetrafluoroethylene (PTFE). This series contains greases with a range of specific additives for use in different applications.
Klübertemp GR RT 2 contains a highly effective metal corrosion inhibitor and is preferred for metal components and surfaces.
Klübertemp GR RT 15N shows good compatibility with plastics and elastomers, enabling a wide range of component materials to be selected.
Benefits
- For use at high operating temperatures up to 250°C
- For applications exposed to aggressive media
Application
Klübertemp GR RT greases are used in numerous sectors of industry and a wide variety of components operating at high temperatures.
Behavior towards elastomers and plastics:
Lubricants based on perfluorinated polyether oils and polytetrafluoroethylene are generally regarded as neutral towards most elastomers and plastics (exception: perfluorinated rubber).
Nevertheless we recommend testing compatibility with the material to be used, especially prior to series application.
Application Notes
For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Klüberalfa XZ 3-1. Then blow the surfaces with clean, dry compressed air or hot air to remove solvent residues. For initial lubrication, the friction points must be clean and bright, i.e. free from oil, grease and perspiration. Klübertemp GR RT greases are applied directly or by means of brush, spatula or lubricant dispenser. The technical sales departments at Klüber Lubrication may be contacted at any time for advice to ensure optimum service life results.
Specifications
| Product data | Klübertemp GR RT 15N |
| Article number | 090182 |
| Chemical composition, type of oil | PFPE |
| Chemical composition, solid lubricant | PTFE |
| Lower service temperature | -20°C / -4°F |
| Upper service temperature | 250°C / 482°F |
| Color space | White |
| Texture | Homogeneous |
| Density at 20°C | Approx. 1.9 g/cm3 |
| NLGI grade, DIN 51818 | 2 |
| Worked penetration, DIN ISO 2137, 25°C, lower limit value | 265 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25°C, upper limit value | 295 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40°C | Approx. 370 mm3/s |
| Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100°C | Approx. 33 mm3/s |
| Oil separation, based on ASTM D 6184 [FTMS 791 C 321], after 30 h/200°C | <= 12 % by weight |
| Evaporation loss, ASTM D 2595 22h/204°C | <= 3 % by weight |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 60 months |
Shelf Life
It is strongly recommended using all fluids and greases at the time of receipt, however when storage is necessary, rotate older stock into use first and observe the recommended parameters listed below.
Klüber Grease
Shelf Life of Klüber Grease is a minimum of 5 years; in this case although there won't be problems in terms of chemical stability there can be oil separation over time, which is normal.
Ordering Table
All dimensions listed below, unless otherwise stated, are in grams.
| Description | Grade | Size | Safety Data Sheet | Part Number | Price | In Stock | Add To Cart | |
|---|---|---|---|---|---|---|---|---|
| Description | Grade | Size | Safety Data Sheet | Part Number | Price | In Stock | Add To Cart | |
|
GREASE, |
Klübertemp GR RT 15N PFPE Vacuum Grease | 1 kg Can |  |
KLRT15NL | $1,583.00 |
|
||
|
GREASE, |
Klübertemp GR RT 15N PFPE Vacuum Grease | 100 g Tube | |
KLRT15NF | $187.00 |
|