Klübertemp GR UT 18N Vacuum Grease –
Temp Range (-30 to +230 (°C))
High-temperature multi-purpose grease
Description
Klübertemp GR UT 18N is a white, odourless high-temperature multipurpose grease based on a perfluorinated polyether (PFPE) oil and a polytetrafluoroethylene (PTFE) thickener. The base oil viscosity enables a wide variety of applications to be served over a wide operating temperature range (peak temperature 250°C).
Klübertemp GR UT 18N shows a neutral behavior towards most plastics and elastomers and can therefore be used for a variety of component materials.
Benefits
- Multiple uses over a wide operating temperature range
- Good resistance to aggressive media
- High thermal stability
- Neutral towards plastic materials
Application
Klübertemp GR UT 18N is used in numerous sectors of industry and a wide variety of components in high- and low-temperature applications requiring medium base oil viscosity.
Application examples are
- Precision engineering
- Special appliance industry
- Rolling and plain bearings
- Plastic/plastic material combinations
- Lubrication of seals
Behavior towards elastomers and plastics
Lubricants based on perfluorinated polyether oils and polytetrafluoroethylene are generally regarded as neutral towards most elastomers and plastics (exception: perfluorinated rubber).
Nevertheless we recommend testing compatibility with the material to be used, especially prior to series application.
Application Notes
For optimum lubrication results, we recommend cleaning the friction points with white spirit 180/210 followed by Klüberalfa XZ 3-1. Then blow the surfaces with clean, dry compressed air or hot air to remove solvent residues. For initial lubrication, the friction points must be clean and bright, i.e. free from oil, grease and perspiration). Klübertemp GR UT 18N is applied directly or by means of brush, spatula or lubricant dispenser. The technical sales departments at Klüber Lubrication may be contacted at any time for advice to ensure optimum service life results.
Specifications
| Product data | Klübertemp GR UT 18N |
| Article number | 090180 |
| Chemical composition, type of oil | PFPE |
| Chemical composition, solid lubricant | PTFE |
| Lower service temperature | -30°C / -22°F |
| Upper service temperature | 230°C / 446°F |
| Color space | white |
| Texture | homogeneous |
| Density at 20°C | approx. 1.9 g/cm3 |
| NLGI grade, DIN 51818 | 2 |
| Worked penetration, DIN ISO 2137, 25°C, lower limit value | 265 x 0.1 mm |
| Worked penetration, DIN ISO 2137, 25°C, upper limit value | 295 x 0.1 mm |
| Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40°C | approx. 145 mm2/s |
| Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100°C | approx. 16 mm2/s |
| Oil separation, based on ASTM D 6184 [FTMS 791 C 321], after 30 h/150 °C | <= 9 % by weight |
| Evaporation loss, ASTM D 2595 22h/149°C | <= 3 % by weight |
| Minimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx. | 60 months |
Shelf Life
It is strongly recommended using all fluids and greases at the time of receipt, however when storage is necessary, rotate older stock into use first and observe the recommended parameters listed below.
Klüber Grease
Shelf Life of Klüber Grease is a minimum of 5 years; in this case although there won't be problems in terms of chemical stability there can be oil separation over time, which is normal.
Ordering Table
All dimensions listed below, unless otherwise stated, are in grams.
| Description | Grade | Size | Safety Data Sheet | Part Number | Price | In Stock | Add To Cart | |
|---|---|---|---|---|---|---|---|---|
| Description | Grade | Size | Safety Data Sheet | Part Number | Price | In Stock | Add To Cart | |
|
GREASE, |
Klübertemp GR UT 18N PFPE Vacuum Grease | 100 g Tube |  |
KLUT18NF | $212.00 |
|